- All Jantzen Audio products are only intended for application on passive speaker crossovers and certain other applications related to audio systems for home use. For our capacitors specifically, the capacitor models with a voltage rating from 400 volts DC and above are also suitable for home use tube and power amplifiers.
- For professional audio application, kindly contact us for a dialogue about application, as our products may not be suitable for use in all PA systems or other professional audio applications.
- The only data we can provide is what is already provided in our website.
- We do not provide measurements or data that we deem irrelevant for the intended application areas for our products.
- We do not have the equipment nor the setup to measure such data (including but not limited to the examples listed below):
– DC saturation data for coils/cores/discs
– Exact power-handling in relation specific or maximum voltage or amperage loads
– Permeability of the iron core cores/discs
– Continuous current ratings
– Working temperature limitations
– IRMS and ISAT currents
For capacitors:
We only provide ESR data for our aluminum electrolytic “eleCaps” capacitors
All other relevant data that we can provide is already given in the datasheets for the various capacitor models - We do not offer advice, additional data, and any technical assistance if our products are used in any other application than the approved audio related application areas outlined above.
- If our products are used in other audio related application or in any non-audio application than specified above, our product warranty will be void and we will not cover any damages to our products, collateral damage or any damage or issues stemming from the wrongful application our products in applications there are not intended for.
Custom induction coils:
We only offer custom induction coils based on inductance and DCR target (ohmic resistance) values.
We do not offer to make custom induction coils based on number of turns, sizing (Ø / H / Inner Ø) or any other requirements not relating to inductance and DCR.
The winding wires and foils we use are specifically engineered for application on passive speaker crossovers, so if our coils will be suitable for any other applications, will be subject to customers purchasing samples and testing this for themselves.